No commentary but will write up a description of things here. Video starts showing how the Sort portion of the factory work.
All of the junk material goes into a filing cabinet.
From there material is pulled onto a conveyor belt and goes to the sorting and storing stack.
All crafting materials are accounted for in one of the 24 sorting machines which then goes to a hopper where the materials will wait until needed..
There is a 25th hopper for all other stuff that is not a crafting material.
Producing
After reaching the storage stack we go over to the main factory computer. Select a factory and tell it what to produce. In the video we select the ammo factor to produce 5.56mm rounds.
After this step find the ammo factory switch on the wall and turn it on. This will also cause the sorting arm to direct materials from the main belt to the factory.
Then go over the the "materials" wall and find the switch for Lead and Fertilizer. Turn these on. Note there are main switches that provide power to each half of the materials wall.
Once on the Lead and Fertilizer will be pulled from their respective storage hoppers and dropped onto the main line. (note the nixie tubes telling you what hoppers are being pulled)
The switches only need to be on for a short time, a lot of material comes out very quickly.
Once enough has been put onto the belt, turn off the materials.
Anything on the belt is then directed to the correct factory (again nixie tubes are used to display which factory is active)
Once supplied enough the factory begins building the item requested.
Those are then consolidated and combined into a single hopper at the end of the line.
Finished producing goods.
Once a factory is turned off, all materials lingering inside are pulled and put back on the main line to be resorted and stored.
0 Comments